ACE-CAA Issue 3 Sample Question

The following capnogram is MOST likely associated with which of the following?

 

A. Faulty inspiratory valve X

B. Exhausted carbon dioxide absorber X

C. Partially obstructed endotracheal tube ✔

Read the discussion below.

Test your knowledge of anesthesia fundamentals with 135 questions just like this one.

Order ACE-CAA Issue 3

Discussion

The time capnogram (Figure 1) can provide evidence of certain disease states and equipment issues. A faulty inspiratory valve makes the inspiratory limb of the circuit bidirectional and increases dead space, allowing for rebreathing of exhaled gas. The characteristic finding on the capnogram is a slower (less steep) downslope that extends into the inspiratory phase (phase 0) (Figure 2, Panel A). An exhausted carbon dioxide absorber (or incompetent expiratory valve) will result in an elevated baseline carbon dioxide value on the capnogram (Figure 2, Panel B). A partially obstructed endotracheal tube or any condition that impairs exhalation (eg, bronchospasm or chronic obstructive pulmonary disease) produces a capnogram that has a slowly rising phase III (Figure 2, Panel C). A leak in the gas sampling line will produce a capnogram that has a dual plateau in phase III. The sharp rise at the end of phase III is due to an increase in circuit pressure (decreased leak) that occurs at the onset of inhalation (Figure 2, Panel D).

Figure 1. Normal capnogram. © 2020 American Society of Anesthesiologists.

 

Figure 2. Capnograms showing (A) the effect of an incompetent inspiratory valve; (B) the elevated baseline that is seen with an exhausted carbon dioxide absorber; (C) the effect of a partially obstructed endotracheal tube; and (D) the effect of a leak in the sampling line. © 2020 American Society of Anesthesiologists.

 

REFERENCE

1.  Miller RD, ed. Miller’s Anesthesia. 8th ed. Philadelphia, PA: Elsevier Saunders; 2015:1552.